A full featured assembly kit from Destiny for the Front Wheel Drive (Frontie) 1/10 scale touring car class.

Please note: electronics, battery, wheels, tyres, pinion gear, motor,speed control, body are NOT included. Image is for reference only. 


Destiny RX-10FF Features:

  • Transmission 37T/20T in ratio 1.85 to compatible for stock class FF race.
  • Easy remove gear differential for maintenance.
  • New design front and rear upper linkage mount. Fine adjustment on roll center.
  • New design upper deck with multi chassis flex adjustment function. Change the flex point by screw mounting on difference position.
  • Spring Steel double joint drive shaft. Maximum increase steering efficient and cornering speed.
  • Bearing steering rack system design. More proportional and smooth steering feel. Quick and easy ackerman adjustment. Steel steering rack as more reliable.
  • New design 7075 aluminum front and rear suspension mounts. Three different size of suspension mounts to makes wider range adjustment on track width from 40.7-49.5mm.
  • New design plastic eccentric bushing for suspension. Fine adjustment on toe-in and toe-out angle in 0.3 degree per step.
  • New design front and rear lower 7075 aluminum bulkheads.
  • New design 7075 aluminum motor mount and layshaft bulkhead.
  • New design single piece 7075 aluminum servo mount and steering mount. It makes change on chassis flex to improve the steering.
  • New design front and rear shock towers. Made by USA high grade graphite materials.
  • 2.25mm USA high grade graphite materials main chassis*, 2.0mm for upper deck and 3.0mm front and rear shock towers.
  • 2/4/6 deg caster insert is selectable to assembly to c-hub. Large open on c-hub for easy install or remove front cvd.
  • All new design aluminum wheel adaptors. Lightweight and reliable on drivetrain.
  • High grade composite front and rear lower suspension arms, steering knuckles, c-hubs and rear hubs plastic parts from Xenon Racing.
  • Full set low friction coating aluminum damper balls and ball studs.
  • High precision 4 gears differential with 7075 aluminum weight reduced gear drive cups.
  • 7075 aluminum steering and upper linkage turnbuckles. Black color anodized.
  • High quality hard coated short dampers with POM pistons and 20mm damper springs.
  • Bearing supporting front and rear anti-roll bar system.
  • 64P 96T spur gear from Xenon Racing.
  • 17 pcs high grade ball bearings.

*Chassis plate is packaged seperately due to its length


Required for completion (Not included)

FF type body

Electronic Speed Control

Radio Control System

Wheels & Tyres

Steering Servo


Pinion Gear

Shorty Lipo Battery & Charger

Shock & Diff Oil

Cynoacrylate glue


SKU: DRX-00004